An overview of the recent advances in spray-drying
Dairy Sci. Technol., 90 2-3 (2010) 211-224
Published online: 2010-04-26
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Study on the flow pattern and evolution process of an effervescent atomizer
Chen Chen, Xiaofan Gong, Shenghao Yu, Bifeng Yin and Xiujie HeSādhanā 49 (2) (2024)
https://doi.org/10.1007/s12046-024-02475-2
Desiccant Technologies for Improving Air Quality: An Overview of the Brazilian Scenario and Comparison of Available Design Software for Manufactured Desiccant Wheels
York Castillo Santiago, Bruno Gomes Nunes, Geovani Souza Fontana, Daiane Busanello, Alexandre Fernandes Santos, Samuel Moreira Duarte Santos, Estefania Neiva de Mello and Leandro A. SphaierProcesses 11 (7) 2031 (2023)
https://doi.org/10.3390/pr11072031
Combined microfluidics and drying processes for the continuous production of micro-/nanoparticles for drug delivery: a review
Ankit Patil, Pritam Patil, Sagar Pardeshi, Preena Shrimal, Norma Rebello, Popat B. Mohite, Aniruddha Chatterjee, Arun Mujumdar and Jitendra NaikDrying Technology 41 (10) 1533 (2023)
https://doi.org/10.1080/07373937.2023.2167827
Solid-state and particle size control of pharmaceutical cocrystals using atomization-based techniques
Aaron O'Sullivan, Barry Long, Vivek Verma, Kevin M. Ryan and Luis PadrelaInternational Journal of Pharmaceutics 621 121798 (2022)
https://doi.org/10.1016/j.ijpharm.2022.121798
45 (2022)
https://doi.org/10.1002/9781119903000.ch3
Single-crystal Drying: Development of a Continuous Drying Prototype to Optimize Particle Flow and Residence Time Distribution
Manuel Zettl, Isabella Aigner, Craig Hauser, Thomas Mannschott, Peter van der Wel, Hartmuth Schröttner, Johannes Khinast and Markus KrummeJournal of Pharmaceutical Innovation 17 (3) 979 (2022)
https://doi.org/10.1007/s12247-021-09573-2
Laboratory-scale superheated steam spray drying of food and dairy products
Tobias Linke, Janina Happe and Reinhard KohlusDrying Technology 40 (8) 1703 (2022)
https://doi.org/10.1080/07373937.2020.1870127
Innovations in spray drying process for food and pharma industries
Katarzyna Samborska, Sadegh Poozesh, Alicja Barańska, Mariia Sobulska, Aleksandra Jedlińska, Cordin Arpagaus, Narjes Malekjani and Seid Mahdi JafariJournal of Food Engineering 321 110960 (2022)
https://doi.org/10.1016/j.jfoodeng.2022.110960
Deep neural network for generalizing and forecasting on-demand drying kinetics of droplet solutions
Oluwafemi Ayodele George, Aditya Putranto, Jie Xiao, Patrick Shola Olayiwola, Xiao Dong Chen, John Ogbemhe, Teminijesu Jesufemi Akinyemi and Abdolreza KharaghaniPowder Technology 403 117392 (2022)
https://doi.org/10.1016/j.powtec.2022.117392
Surface fat and insolubility of whole camel milk powders as affected by spray drying operating parameters
Haileeyesus Habtegebriel, Dintwa Edward, Michael Wawire, Eyassu Seifu and Volker GaukelFood and Bioproducts Processing 128 121 (2021)
https://doi.org/10.1016/j.fbp.2021.05.001
Low-Cost Eddy-Resolving Simulation in the Near-Field of an Annular Swirling Jet for Spray Drying Applications
Jairo Andrés Gutiérrez Suárez, Alexánder Gómez Mejía and Carlos Humberto Galeano UrueñaChemEngineering 5 (4) 80 (2021)
https://doi.org/10.3390/chemengineering5040080
Effects of elasticity number and time constant ratio on breakup and droplet formation of viscoelastic planar liquid sheet co-flowing with gases of equal velocities
Debayan Dasgupta, Saurabh Sharma, Sujit Nath and Dipankar BhanjaJournal of Fluid Mechanics 920 (2021)
https://doi.org/10.1017/jfm.2021.412
Three-dimensional modelling of two-phase flow and transport in a pilot centrifugal spray dryer
Shuo Zhang, Nan Liu, Yanqiu Pan, et al.Chemical Physics Letters 765 138309 (2021)
https://doi.org/10.1016/j.cplett.2020.138309
Effects of Y-Jet Nozzle Mixing Chamber Length and the GLR on Spatial Asymmetric Spray
Sang Ji Lee, Ji Yeop Kim and Jung Goo HongACS Omega 6 (26) 16795 (2021)
https://doi.org/10.1021/acsomega.1c01334
Using CFD Simulations to Guide the Development of a New Spray Dryer Design
Timothy A. G. Langrish, James Harrington, Xing Huang and Chao ZhongProcesses 8 (8) 932 (2020)
https://doi.org/10.3390/pr8080932
Unusual drying behaviour of droplets containing organic and inorganic solutes in superheated steam
Amanda Lum, Nicholas Cardamone, Ron Beliavski, et al.Journal of Food Engineering 244 64 (2019)
https://doi.org/10.1016/j.jfoodeng.2018.09.021
Influence of Inlet Drying Air Temperature and Milk Flow Rate on the Physical, Optical and Thermal Properties of Spray-Dried Camel Milk Powders
Jackline Akinyi Ogolla, Boris Kulig, Liliana Bădulescu, et al.Food and Bioprocess Technology 12 (5) 751 (2019)
https://doi.org/10.1007/s11947-019-2243-5
Theoretical investigation and experimental verification of a mathematical model for counter-flow spray separation tower
Yueming Liu, Jing Yu, Liang Chen and Sumin JinInternational Journal of Heat and Mass Transfer 120 316 (2018)
https://doi.org/10.1016/j.ijheatmasstransfer.2017.12.034
The Effect of Pretreatment (Spray Drying) on the Yield and Selected Nutritional Components of Whole Camel Milk Powder
Haileeyesus Habtegebriel, Michael Wawire and Daniel SilaJournal of Food Science 83 (12) 2983 (2018)
https://doi.org/10.1111/1750-3841.14361
Simulation of food drying processes by Computational Fluid Dynamics (CFD); recent advances and approaches
Narjes Malekjani and Seid Mahdi JafariTrends in Food Science & Technology 78 206 (2018)
https://doi.org/10.1016/j.tifs.2018.06.006
261 (2018)
https://doi.org/10.1002/9781118964194.ch11
Thermodynamic characterization of single-stage spray dryers: Mass and energy balances for milk drying
Cleuber Raimundo da Silva, Evandro Martins, Arlan Caldas Pereira Silveira, et al.Drying Technology 35 (15) 1791 (2017)
https://doi.org/10.1080/07373937.2016.1275675
249 (2017)
https://doi.org/10.1002/9781118930526.ch12
Fundamental and empirical modelling of co-current spray drying process – a review
Z. Abdullah, F.S. Taip, M.K. Siti Mazlina and R.Z. Abdul RahmanActa Horticulturae (1152) 219 (2017)
https://doi.org/10.17660/ActaHortic.2017.1152.30
269 (2017)
https://doi.org/10.1002/9781118930526.ch13
Low-pressure twin-fluid atomization: Effect of mixing process on spray formation
Matouš Zaremba, Lukas Weiß, Milan Malý, Michael Wensing, Jan Jedelský and Miroslav JíchaInternational Journal of Multiphase Flow 89 277 (2017)
https://doi.org/10.1016/j.ijmultiphaseflow.2016.10.015
Process-Spray
Agnes Kleinhans, Jewe Schröder, Philipp Stähle, Volker Gaukel and Heike P. SchuchmannProcess-Spray 843 (2016)
https://doi.org/10.1007/978-3-319-32370-1_21
Twin-fluid atomization of viscous liquids: The effect of atomizer construction on breakup process, spray stability and droplet size
M. Mlkvik, P. Stähle, H.P. Schuchmann, V. Gaukel, J. Jedelsky and M. JichaInternational Journal of Multiphase Flow 77 19 (2015)
https://doi.org/10.1016/j.ijmultiphaseflow.2015.06.010
Influence of processing conditions on functional and reconstitution properties of milk powder made from Osmanabadi goat milk by spray drying
Ravula Sudharshan Reddy, C.T. Ramachandra, Sharanagouda Hiregoudar, et al.Small Ruminant Research 119 (1-3) 130 (2014)
https://doi.org/10.1016/j.smallrumres.2014.01.013
Advanced computational modelling for drying processes – A review
Thijs DefraeyeApplied Energy 131 323 (2014)
https://doi.org/10.1016/j.apenergy.2014.06.027
Energy conversion during effervescent atomization
Jan Jedelsky and Miroslav JichaFuel 111 836 (2013)
https://doi.org/10.1016/j.fuel.2013.03.053
Computational Fluid Dynamics in the Design and Analysis of Thermal Processes: A Review of Recent Advances
Tomás Norton, Brijesh Tiwari and Da-Wen SunCritical Reviews in Food Science and Nutrition 53 (3) 251 (2013)
https://doi.org/10.1080/10408398.2010.518256
Evaluation of unsteadiness in effervescent sprays by analysis of droplet arrival statistics – The influence of fluids properties and atomizer internal design
Meng Liu, Yufeng Duan, Tienan Zhang and Yiqian XuExperimental Thermal and Fluid Science 35 (1) 190 (2011)
https://doi.org/10.1016/j.expthermflusci.2010.09.001